Pitney Bowes relay 3000, User Manual

Page: 49 / 120

Program a Job ● 2
2-23 SV63138 Rev. A
Modify an Existing Job
To modify an existing job follow these steps. (This requires Supervisor
level access.)
1. Tap the
Setup
button to enter setup mode.
2. The Enter Access Code field displays over the inserter model on the
touch screen display. Tap to increase or decrease to 71 .
3. Tap to accept the code and advance to the job selection.
4. Tap the icons to display the job you wish to modify.
5. Tap to accept the job selection and advance to the job
programming settings.
6. Tap the icons to scroll through the setting(s).
7. Tap the icons to scroll through the options or desired values.
8. Tap to accept the job setting.
9. Tap the Setup button to save the changes and exit setup mode.
Delete a Job
To delete an existing job from the inserter system follow these steps. (This
requires Supervisor level access.)
1. Tap the
Setup button to enter setup mode.
2. The Enter Access Code field displays over the inserter model on the
touch screen display. Tap to increase or decrease to 71 .
3. Tap to accept the code and advance to the job selection.
4. Tap the icons to display the job you wish to delete.
5. Tap the to delete the job. The display shows “Press again to
confirm.”
6. Tap the again. The display briefly shows “Deleting Job” as the job
is erased.
7. Tap the Setup button to exit setup mode.