Pitney Bowes relay 3000, User Manual

Page: 109 / 120

Troubleshooting and Error Messages • 7
7-11 SV63138 Rev. A
Message Action
PAPER SHORT The inserter detected that the material used is too
short in length.
• Check the actual material length matches the
length displayed.
• If correct, request another trial piece.
PAPER SHORT
CHECK STACKER
The inserter detected that the material used is too
short in length.
• Check the actual material length matches the
length displayed.
• If correct, request another trial piece.
SET LEVER The manual feed lever is in the incorrect position
for the mode of running.
• Move the manual feed lever to the correct
position (left position: manual; right: automatic).
STREAM FEED The inserter detected two sheets fed together from
the feed tray indicated.
• Remove the material from the inserter.
• Reload and restart the inserter.
STREAM FEED
CHECK STACKER
The inserter detected two sheets fed together from
the feed tray indicated.
• Remove the stream feed from the stacker.
• Reload and restart the inserter.
SYSTEM ERROR
POWER DOWN
A fault has been detected in the main software.
• Switch the inserter off and on and retry.
• If the problem persists, call for service.
TRAY EMPTY The tray indicated has no material. Reload the tray
and press Start .