Pioneer DVH-P4150UB, Operation Manual

Page: 63 / 84

Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
!
An adjusted time alignment is memorized
in
CUSTOM .
1 Use MULTI-CONTROL to select FL (time
alignment adjustment) in the audio func-
tion menu.
Refer to Introduction of DSP adjustments on
page 54.
#
When you select TA :OFF in INITIAL , you can-
not select FL .
#
If a position other than F/L or F/R is selected,
CHECK POSI is displayed. To set the position,
refer to Using the position selector on page 55.
2 Press
c
or
d
to select the speaker to be
adjusted.
FL
(front speaker left)
—
C (center speaker)
—
FR
(front speaker right)
—
RR (rear speaker right)
—
RL (rear speaker left)
—
SW (subwoofer)
#
You cannot select speakers whose size is set
to
OFF
. (Refer to Setting the speaker setting on
page 60.)
3 Press
a
or
b
to adjust the distance be-
tween the selected speaker and the listen-
ing position.
0.0
(cm) to 500.0 (cm) is displayed as the dis-
tance is increased or decreased.
4 Press BAND/ESC to return to the ordin-
ary display.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’
s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
POWERFUL Powerful
NATURAL
Natural
VOCAL Vocal
EQ FLAT Flat
CUSTOM1
Custom 1
CUSTOM2 Custom 2
SUPER-BASS Super bass
!
CUSTOM1
and
CUSTOM2
are adjusted
equalizer curves.
!
When
FLAT
is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT
and a set equalizer curve.
1 Use MULTI-CONTROL to select
POWERFUL (equalizer recall) in the audio
function menu.
Refer to Introduction of DSP adjustments on
page 54.
2 Press
c
or
d
to select the equalizer.
POWERFUL
—
NATURAL
—
VOCAL
—
FLAT
—
CUSTOM1
—
CUSTOM2
—
SUPER-BASS
Adjusting 3-band parametric
equalizer
For CUSTOM1 and CUSTOM2 equalizer
curves, you can adjust the front, rear and cen-
ter equalizer curves separately by selecting a
center frequency, an equalizer level and a Q
factor for each band.
!
A separate CUSTOM1 curve can be cre-
ated for each source.
!
A CUSTOM2 curve can be created com-
mon to all sources.
<
CRB2932-A/N
>63
Available accessories
En
63
Section
03
A
vailable
accessories