Introduction to advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
function.
BSM
(best stations memory)
—
LOCAL
(local
seek tuning)
Notes
!
You can also select the function by pressing
FUNCTION
on the remote control.
!
To return to the previous display, press
DISP/BACK/SCRL
.
!
To return to the main menu, press and hold
DISP/BACK/SCRL
.
!
To return to the ordinary display, press
BAND/ESC
.
!
If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies.
!
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons
1
/
S.Rtrv
/
DVD MENU
to
6
/
/
ANGLE
.
1
Use MULTI-CONTROL to select BSM in
the function menu.
Refer to
Introduction to advanced operations
on this page.
2
Press MULTI-CONTROL to turn BSM on.
The six strongest broadcast frequencies are
stored in the order of their signal strength.
#
To cancel, press
MULTI-CONTROL
again.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Use MULTI-CONTROL to select LOCAL in
the function menu.
Refer to
Introduction to advanced operations
on this page.
2
Press MULTI-CONTROL to display the
setting mode.
3
Turn MULTI-CONTROL to set the sensi-
tivity.
FM:
OFF
—
LEVEL 1
—
LEVEL 2
—
LEVEL 3
—
LEVEL 4
AM:
OFF
—
LEVEL 1
—
LEVEL 2
The
LEVEL 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
#
You can also perform the same operation by
pressing
a
or
b
.
4
Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been canceled before
determination, operation is settled.
<
CRB2932-A/N
>16
Operating this unit
En
16
Section
02
