1
Use MULTI-CONTROL to select OFF
(sound field control) in the audio function
menu.
Refer to
Introduction of DSP adjustments
on
page 54.
2
Press
c
or
d
to select the desired SFC
mode.
MUSICAL
(musical)
—
DRAMA
(drama)
—
ACTION
(action)
—
JAZZ
(jazz)
—
HALL
(hall)
—
CLUB
(club)
—
OFF
(off)
Note
If the source is a 2-channel LPCM audio or a 2-
channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e.,
MUSICAL
,
DRAMA
or
ACTION
), we
recommend turning Dolby Pro Logic II on. On the
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e.,
JAZZ
,
HALL
or
CLUB
), we recommend turning Dolby
Pro Logic II off.
Using the down-mix function
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1
Use MULTI-CONTROL to select Lo/Ro
(down mix) in the audio function menu.
Refer to
Introduction of DSP adjustments
on
page 54.
2
Press
c
or
d
to switch the down mix
settings.
!
Lt/Rt
–
Down mix so that the surround
components can be restored (decoded).
!
Lo/Ro
–
Stereo mix the original audio that
do not contain channel modes such as sur-
round components.
Using the dynamic range control
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
!
The dynamic range control is effective only
on Dolby Digital sounds.
1
Use MULTI-CONTROL to select DRC in
the audio function menu.
Refer to
Introduction of DSP adjustments
on
page 54.
#
When playing other than the DVD disc, you
cannot switch to
DRC
.
2
Press
a
to turn the dynamic range con-
trol on.
#
To turn dynamic range control off, press
b
.
Using the direct control
You can override audio settings to check for ef-
fectiveness of your audio settings.
!
All audio functions are locked out when the
direct control is on except
VOLUME
and
PLII
.
1
Use MULTI-CONTROL to select DIRECT
in the audio function menu.
Refer to
Introduction of DSP adjustments
on
page 54.
2
Press
a
to turn the direct control on.
#
To turn direct control off, press
b
.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the FM volume level,
which remains unchanged.
1
Compare the FM volume level with the
level of the source you wish to adjust.
2
Use MULTI-CONTROL to select SLA in
the audio function menu.
Refer to
Introduction of DSP adjustments
on
page 54.
<
CRB2932-A/N
>57
Available accessories
En
57
Section
03
A
vailable
accessories
