Other Functions
Using the AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to
AUX1
or
AUX2
. The relation-
ship between
AUX1
and
AUX2
sources is ex-
plained below.
About
AUX1
and
AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1
source:
When connecting auxiliary device using the
front AUX input
!
You need setting in the initial setting menu.
Refer to
Switching the auxiliary setting
on
page 44.
!
If an iPod with video capabilities is con-
nected to this unit via 3.5 mm plug (4 pole)
cable (e.g., CD-V150M), you can enjoy the
video contents of the iPod.
!
It is possible to connect a portable audio/
video player by using a 3.5 mm plug (4
pole) to RCA cable, which is sold sepa-
rately. However, depending on the cable, re-
verse connection between red (right side
audio) cable and yellow (video) cable is re-
quired. Otherwise, audio and video may not
be correctly reproduced.
%
Insert the mini plug into the AUX input
jack on this unit.
For more details, refer to
Head unit
on page 9.
This auxiliary device is automatically set to
AUX1
.
AUX2
source:
When connecting auxiliary device using the rear
RCA input
!
You need setting in the initial setting menu.
Refer to
Switching the auxiliary setting
on
page 44.
!
When you connect AV component to the
AV input with an RCA cable, you need set-
ting in the initial setting menu. Refer to
Set-
ting the AV input
on page 45.
%
Use the rear RCA input to connect an
auxiliary device featuring RCA output.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX2
.
#
You can only make this type of connection if
the auxiliary device has RCA outputs.
Selecting AUX as the source
%
Press SRC/OFF to select AUX (AUX1 or
AUX2) as the source.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, refer to
Switching the auxiliary setting
on page 44.
Switching between digital and
analog
When this unit is connected to the DEQ-
P7650/DEQ-P6600, you can switch to the AUX
mode to analog or digital. However, when you
use
AUX2
as the source, make sure the AUX
mode is set to analog. AUX digital should not
be used with this unit.
1
Press SRC/OFF to select AUX2 as the
source.
Press
SRC
/
OFF
until
AUX2
appears in the dis-
play.
#
If the auxiliary setting is not turned on,
AUX2
cannot be selected. For more details, refer to
Switching the auxiliary setting
on page 44.
2
Press BAND/ESC to switch the modes.
ANALOG
(analog)
—
DIGITAL
(digital)
<
CRB2932-A/N
>48
Operating this unit
En
48
Section
02
