!
Make a note of the code as you will need it
when you register with a DivX VOD provider.
#
Pressing
RETURN
takes you back to the pre-
vious display.
Setting the down sampling output
If the sampling frequency of the audio is more
than 96 kHz, the audio outputted from the digi-
tal output of this unit can be reduced to 48
kHz. Normally, set the down sampling output
to on. If this unit
’
s digital output is not used,
there is no need to change settings.
1
Move the thumb pad up or down to se-
lect SAMPLING OUTPUT in GEN.
2
Click the thumb pad.
Each time you click the thumb pad the se-
lected setting switches on or off.
#
Pressing
RETURN
takes you back to the pre-
vious display.
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Press SRC/OFF and hold until the unit
turns off.
2
Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3
Turn MULTI-CONTROL to select one of
the initial settings.
CLOCK SET
(clock)
—
FM STEP
(FM tuning
step)
—
AM STEP
(AM tuning step)
—
AUX1
(auxiliary input1)
—
AUX2
(auxiliary input2)
—
VIDEO IN
(AV input setting)
—
SCROLL
(ever
scroll)
—
COLOR SYS
(DVD output signal set-
ting)
—
V.OUT
(display connection)
—
DIGITALATT
(digital attenuation)
—
RESET
(audio reset)
Use the following instructions to operate each
particular setting.
Notes
!
You can also select the function by pressing
FUNCTION
on the remote control.
!
To return to the previous display, press
DISP/BACK/SCRL
.
!
To cancel initial settings, press
BAND/ESC
.
!
When
V.OUT
is set to
ON
, you cannot switch
to
SCROLL
.
!
When the multi-channel processor (DEQ-
P7650/DEQ-P6600) is connected to this unit,
you can operate
DIGITALATT
and
RESET
.
Setting the clock
Use these instructions to set the clock.
1
Use MULTI-CONTROL to select
CLOCK SET in the initial setting menu.
Refer to
Adjusting initial settings
on this page.
<
CRB2932-A/N
>43
Operating this unit
En
43
Section
02
Operating
this
unit
