#
When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
POSI
,
AUTO EQ
and
AUTO TA
will be canceled.
#
When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
#
When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to
PLII
.
#
All audio functions are locked out when the di-
rect control is on except
VOLUME
and
PLII
.
#
When you select
MUSIC
in the
PLII
, you can
select adjusting music mode.
#
When playing other than the DVD disc, you
cannot switch to
DRC
.
#
When selecting FM as the source, you cannot
switch to
SLA
.
#
When you select
TA :OFF
in
INITIAL
, you can-
not select
FL
.
#
You cannot select
AUTO EQ
if auto TA and EQ
has not been carried out.
SET A-EQ
is displayed.
#
To return to the display of each source, press
BAND/ESC
.
#
If you do not operate the DSP function except
for
TEST TONE
,
FL
and
PEQ
within about 30 sec-
onds, the display is automatically returned to the
source display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1
Use MULTI-CONTROL to select FADER in
the audio function menu.
Refer to
Introduction of DSP adjustments
on
the previous page.
#
If the balance setting has been previously ad-
justed,
BALANCE
will be displayed.
2
Press
a
or
b
to adjust front/rear speak-
er balance.
FADER :F25
to
FADER :R25
is displayed as the
front/rear speaker balance moves from front to
rear.
#
FADER : 0
is the proper setting when only two
speakers are used.
3
Press
c
or
d
to adjust left/right speaker
balance.
BALANCE:L25
to
BALANCE:R25
is displayed
as the left/right speaker balance moves from
left to right.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
!
When you make adjustments to the listen-
ing position, the speaker outputs are auto-
matically set for appropriate levels. You can
tailor the levels more precisely referring to
Adjusting the speaker output levels using a
test tone
or
Adjusting the speaker output le-
vels
.
1
Use MULTI-CONTROL to select POSI in
the audio function menu.
Refer to
Introduction of DSP adjustments
on
the previous page.
2
Press
c
/
d
/
a
/
b
to select a listening po-
sition.
Direction
Display
Position
c
F/L
Front seat left
d
F/R
Front seat right
a
FRT
Front seats
b
ALL
All seats
#
To cancel the selected listening position,
press the same button again.
<
CRB2932-A/N
>55
Available accessories
En
55
Section
03
A
vailable
accessories
