2
Press MULTI-CONTROL to display the
setting mode.
#
Press
DISP/BACK/SCRL
to return to the pre-
vious display.
3
Press MULTI-CONTROL to select the seg-
ment of the clock display you wish to set.
Each time you press
MULTI-CONTROL
, one
segment of the clock display is selected.
Hour
—
Minute
As you select segments of the clock display,
the selected segment blinks.
4
Turn MULTI-CONTROL to put a clock
right.
#
You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
!
If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune
in the stations with manual tuning or use
seek tuning again.
1
Use MULTI-CONTROL to select FM STEP
in the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Press MULTI-CONTROL to display the
setting mode.
#
Press
DISP/BACK/SCRL
to return to the pre-
vious display.
3
Turn MULTI-CONTROL to select the FM
tuning step.
Turning
MULTI-CONTROL
will switch the FM
tuning step between 50 kHz and 100 kHz. The
selected FM tuning step will appear in the dis-
play.
#
You can also perform the same operations by
pressing
a
or
b
.
4
Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been canceled before
determination, operation is settled.
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
kHz to 1 602 kHz allowable) to 10 kHz (530 kHz
to 1 640 kHz allowable).
1
Use MULTI-CONTROL to select AM STEP
in the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Press MULTI-CONTROL to display the
setting mode.
3
Turn MULTI-CONTROL to select the AM
tuning step.
Turning
MULTI-CONTROL
will switch the AM
tuning step between 9 kHz and 10 kHz. The se-
lected AM tuning step will appear in the dis-
play.
#
You can also perform the same operations by
pressing
a
or
b
.
4
Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been canceled before
determination, operation is settled.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Using the AUX source
on page 48.
<
CRB2932-A/N
>44
Operating this unit
En
44
Section
02
