3
Turn MULTI-CONTROL to switch the di-
gital attenuator setting.
!
HIGH
–
High quality sound
!
LOW
–
Minimize distortion sound
#
You can also perform the same operations by
pressing
a
or
b
.
4
Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been canceled before
determination, operation is settled.
Resetting the audio functions
Only when the multi-channel processor (DEQ-
P7650/DEQ-P6600) is connected to this unit,
you can operate this function.
You can reset audio functions other than the
following settings.
!
Volume setting (refer to
Adjusting the vo-
lume
on page 15)
!
Listening position setting (refer to
Using
the position selector
on page 55)
!
Fader/balance setting (refer to
Using bal-
ance adjustment
on page 55)
!
SLA (source level adjustment) setting (refer
to
Adjusting source levels
on page 57)
!
Dynamic range control (refer to
Using the
dynamic range control
on page 57)
!
Direct control setting (refer to
Using the di-
rect control
on page 57)
!
Down-mix setting (refer to
Using the down-
mix function
on page 57)
1
Use MULTI-CONTROL to select RESET in
the initial setting menu.
Refer to
Adjusting initial settings
on page 43.
2
Press MULTI-CONTROL to display YES/
NO selection.
#
Press
DISP/BACK/SCRL
to return to the pre-
vious display.
3
Turn MULTI-CONTROL to display YES.
4
Press MULTI-CONTROL to display
REALLY?.
#
Press
DISP/BACK/SCRL
to return to the pre-
vious display.
5
Press MULTI-CONTROL to reset audio
functions.
COMPLETE
appears in the display.
<
CRB2932-A/N
>47
Operating this unit
En
47
Section
02
Operating
this
unit
