10
<DRC1285>
En
Read before use
ITEMS INCLUDED
20-disc hyper magazine ... 1
SCSI cable (SE) for connecting changer
and drive ...1, 0.35 m
Power cord (for Japan) ... 1
Power cord (for Canada and the U.S.) ... 1
Base stabilizer
DRM-7000: 4
DRM-3000: 2
This type of power cord is for use
in America and Canada only.
Do not use this power cord in places
other than America or Canada.
This type of power cord is for use
in Japan only.
Do not use this power cord in a
places other than Japan.
LVD SCSI interface unit [DRM-ULV16]
This unit is necessary when connecting the DRM-7000/3000
with SE SCSI interface to an LVD host adapter. Always be
sure to contact Pioneer service personnel for installation.
LVD drive connector panel (for 2 drives)
[DRM-LN721]
This connector panel is provided with a cable allowing two
LVD drives to be daisy-chained inside the changer.
LVD drive connector panel (for 4 drives)
[DRM-LN741]
This connector panel is provided with a cable allowing four
LVD drives to be daisy-chained inside the changer.
SCSI terminator (LVD) [DRM-TM160]
This is an externally mounted LVD terminator.
Since the DVD-R7783 is not provided with an LVD SCSI
terminator, termination must be provided for either with the
use of this unit, or else with the SCSI terminator (LVD)
provided with the DRM-ULV16.
SCSI cable (LVD)
[CC-200]
2.5 m, VHDCI 68-pin to Half-pitch 68-pin
[CC-200-8]
8 m, VHDCI 68-pin to Half-pitch 68-pin
[CC-201]
2.5 m, Half-pitch 68-pin to Half-pitch 68-pin
[CC-201-8]
8 m, Half-pitch 68-pin to Half-pitch 68-pin
These are LVD SCSI cables for use with external cabling, to
be used between host adapter and changer, or when daisy-
chaining changers. Select the proper length and connector
configuration for your system.
Multi drive connector panel [DRM-SN721]
This connector panel is provided with a cable allowing two
SE drives to be daisy-chained inside the changer. One panel
is provided as standard equipment, and it can be combined
with “Cable for 2 drives” and “Cable for 4 drives.”
Single drive connector panel [DRM-SN711]
This connector panel can be used for direct connection of an
SE drive to SE SCSI host adapter, or for external daisy chain
connection.
Cable for 2 drives [DRM-SC721]
This is an SCSI cable supporting the expanded daisy-chain
installation of up to two SE drives. When combined with the
Multi drive connector panel, four SE drives can be daisy-
chained inside the changer.
Cable for 4 drives [DRM-SC741]
This is an SCSI cable supporting the expanded daisy-chain
installation of up to four SE drives. When combined with the
Multi drive connector panel, six SE drives can be daisy-chained
inside the changer.
* Installed in the changer body
Summary of Contents for DRM-300
Page 2: ...2 DRC1285 En ...
