179
A
ppe
n
d
ix
NA
V
I/A
V
Registration failed.
The mobile phone’s Bluetooth wire-
less technology is turned off during
the registration step.
Keep turning the target phone’s
Bluetooth wireless technology on
during the registration.
Rejection by the mobile phone has
received.
Operate the target phone and accept
the registration request from the nav-
igation system. (Furthermore, check
the connection settings on your
mobile phone.
Registration step has failed for some
reason.
Retry the registration and if the regis-
tration still fails, try registering using
your mobile phone.
Automatic connection in progress.
Please try again later.
If you try to perform another opera-
tion during automatic connection by
the system.
• Wait for a while and retry.
• Establish that connection tempo-
rarily and retry that later.
Automatic connection in progress.
Please try manually later.
If you try to connect another phone
during automatic connection by the
system.
Establish that connection temporar-
ily and retry it later.
Could not find any available phone.
No available phone exists in the sur-
roundings when the system searches
for the mobile phone featuring Blue-
tooth wireless technology for regis-
tration.
• Turn the target phone’s Bluetooth
wireless technology on.
• Check whether your mobile phone
is turned off and, whether the dis-
tance to your mobile phone is too
far.
Bluetooth unit error. It is not possible
to find any mobile phones.
If the Bluetooth unit (sold separately)
is disconnected from this navigation
system or Bluetooth unit carries out
another processing when the system
search the mobile phone featuring
Bluetooth wireless technology for
registration.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry later.
Bluetooth unit error. The device
name could not be set.
If the Bluetooth unit (sold separately)
is disconnected from this navigation
system or the Bluetooth unit carries
out another process when you
change the device name.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry later.
Registration is not available.
If you try to perform another opera-
tion immediately after connection
failure.
Wait for a while and retry.
Reading failed.
• If you transferred the data from
your mobile phone in a format can
not be received with navigation sys-
tem.
• Disconnection has been made dur-
ing transfer for some reason.
• Select just a suitable item, format,
and then retry.
• Connect your mobile phone again
and retry.
Calibration failed.
Please refer to the owner’s manual.
The touch panel calibration has not
been carried out with appropriate
steps.
Please read the instruction of touch
panel calibration and retry.
➞
Page 166
The HDD is not connected.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Consult your dealer.
Cannot use HDD.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Consult your dealer.
There is no applicable program.
Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Consult your dealer.
The HDD cannot be operated due to
excessive heat.
Please move your vehicle to a safe
place and turn the power off until the
temperature goes down.
Hard disk drive cannot run due to
high temperature.
Park your vehicle to safe place, turn
the ignition switch off, and wait until
the temperature inside the vehicle
drops.
Message
When
What to do
MAN-HD3-SOFTW-EN.book Page 179 Wednesday, January 10, 2007 9:33 AM