86
miroVIDEO DV 200
You can also reduce the size of the video output window in Premiere and
Media Player. By using click-and hold with the left mouse button on the
lower right corner of the playback window dialog box, you can drag the
screen into a smaller shape. The screen should automatically resize while
maintaining the same basic shape. Let go of the mouse button at the desired
size and try the playback again.
Systems equipped with MMX or Pentium II processors are best suited for a
fluent playback. The DV CODEC is optimized for MMX technology.
There are vertical black borders inside of the stored images.
Some DV camcorders do not generate a complete 720 pixel wide image.
Some pixels are left black at the right and /or left border. To work with those
images under Premiere you need to add a cropping filter to cut those lines
and to stretch the image slightly to meet the DV format (720 pixels). Please
refer to the Adobe Premiere User's Manual to learn more about using filters
inside of Premiere.
Jerky, blocky playback using MediaPlayer 5.
If you have installed the Windows MediaPlayer 5, a Microsoft DV CODEC
is present in the system. This decoder only supports the NTSC video
standard and cannot playback PAL encoded DV material properly. The
display is blocky. Rename the qdv.dll in the Windows system directory to
qdv.old and move it to a backup directory of your choice. The Media Player
will now use the installed DV200 CODEC and the playback should work
fine. You should install DirectMedia 6.1 that comes with the installation
program.
The system does not boot. The mouse movement is jerky.
DV devices may cause trouble during the initial driver start. Please
disconnect these from the miroVIDEO DV200 until after the boot process is
complete. After Windows has booted you can connect the camcorder again.
The camera will work fine.
Problem: Problems might occur with uploading video to the DV tape
(recording the edited video back to the DV tape).
Only a few PAL camcorders currently support recording back to the device
from the DV port. On most PAL camcorders it is not possible to upload
digital video.
Solution 1: miroVIDEO DC30 board (for printing to an analog tape).
Cause 2: If your computer system is too slow, the system might abort the
upload or the video quality may be very poor.
Solution 2: Please check to make sure that your system requirements are met
using the DVExpert.
Summary of Contents for miroVIDEO DV200
Page 1: ...miroVIDEO DV200 USER S GUIDE...
Page 94: ...88 miroVIDEO DV 200 NOTES...
Page 110: ...XVI miroVIDEO DV 200 NOTES...
Page 114: ...NOTES...