66
miroVIDEO DV 200
D
EVICE
C
ONTROL WITH
A
DOBE
P
REMIERE
5.1
The DV200 board can control DV devices connected via the 1394
connection, and can query information from the device like time code, for
example. The device control function of the DV200 is capable of controlling
devices that are connected to the board via the 1394 cable.
Before you begin controlling your DV device, you must configure the device
control and Premiere for your device. In Premiere, click the File menu and
then the Preferences command. Select the Scratch Disks / Device Control
command.
1. In the device control list box, first select the entry:
miroVIDEO DV device control.
2. Then click the Options button.
By doing so, you call up a dialog box in which you can define the settings
needed to configure your system. If you have established a correct
connection to the DV device, Premiere will save these parameters for later
Premiere sessions. You must reconfigure your options if you select a
different kind of device control or if the "No 1394 device found" warning
should appear.
If no miroVIDEO DV device control entry is listed in the list box, check
whether the file
X-DV200.prm
is in the corresponding Adobe folder. If
this is not the case, quit Premiere, reinstall the DV200 drivers for Premiere
5.1 and restart Premiere.
The Select AV device dialog box appears when you select DV200 device
control for the first time. If this is not the case, click the Options button to
configure device control.
Summary of Contents for miroVIDEO DV200
Page 1: ...miroVIDEO DV200 USER S GUIDE...
Page 94: ...88 miroVIDEO DV 200 NOTES...
Page 110: ...XVI miroVIDEO DV 200 NOTES...
Page 114: ...NOTES...
