Pinnacle Systems miroVIDEO DV200, User Manual

Page: 21 / 114

User´s Guide
15
After the drivers have been copied, the installation program starts
automatically. Proceed with the “ Installing the software for Windows 95 /
Windows 98” section as of page 16.
I
NSTALLING THE DRIVERS FOR
W
INDOWS
98
Microsoft provides Windows 98 with own drivers for 1394 bus boards.
1. Switch on computer.
Switch on your computer. Windows 98 is started automatically.
If your computer is configured in such a way, that Windows 98 is not
started automatically, start Windows 98 now.
After Windows 98 starts, the new hardware is found, and the Add New
Hardware Wizzard dialog appears.
2. Click Next.
Click on the Next button.
3. Select Display a list of all drivers in a specific location, click Next.
Select the option Display a list of all drivers in a specific location, so you
can select the driver you want and click on Next.
In the following window the found Adaptec drivers are displayed.
4. Insert the CD-ROM.
If you have not already done so, insert the installation CD-ROM into the
CD-ROM drive.
5. Click Have Disk... .
Click on the Have Disk... button.
6. Click Browse, switch to the
:\DRIVER
directory.
Click on the Browse button and switch to the directory :
\DRIVER
on
your CD-ROM drive.
7. Click OK.
Click on the OK button.
8. Click Next.
Click Next to complete the installation of the DV200 driver.
After the drivers have been copied, the installation program starts
automatically. Proceed with the “ Installing the software for Windows 95 /
Windows 98” section as of page 16.