User´s Guide
33
The DV Device Controller lets you control your DV device. The video
tape does not automatically stop when it reaches the end of a clip. To
pause the playback, click on the Pause button. For a detailed description
of the DV Device Controller, see p. 45.
3. Choose the clips you want to capture.
Once you have „sifted through“ your video footage, you can choose the
clips you actually want to capture. To do so, drag the desired clips from
the Tape Gallery and drop them in the Capture Gallery
*
. You can arrange
the clips in the Capture Gallery in any order.
4. Add trims.
Sometimes you may not want to use an entire clip, but rather only part of
a clip. In that case, you can edit the clip in question using the DV Device
Controller.
You can define the in point and out point of a clip using the
(in point)
and
(out point) buttons. You can either click on the buttons during
playback, or pause the tape at the desired location and then click on these
buttons. You can also forward and rewind the tape using the slider control
*
Drag & Drop:
Left-click the desired element. Hold the mouse button down and drag the element to the desired position. To
„drop“ the element, release the mouse button.
Summary of Contents for miroVIDEO DV200
Page 1: ...miroVIDEO DV200 USER S GUIDE...
Page 94: ...88 miroVIDEO DV 200 NOTES...
Page 110: ...XVI miroVIDEO DV 200 NOTES...
Page 114: ...NOTES...
