Pinnacle Systems miroVIDEO DV200, User Manual

Page: 15 / 114

User´s Guide
9
Installing Adobe Premiere
The following chapter describes the procedure to install Adobe Premiere.
It is required that you install Adobe Premiere before installing the
miroVIDEO DV200 board and software. The DV200 software installation
program needs to know where the Adobe Premiere folders are located so
that it can copy the DV200 plug-ins and presets into the corresponding
folders.
Proceed as follows to install Adobe Premiere:
1. Place the Adobe Premiere CD-ROM in your CD-ROM drive.
2. If the installation program is not started automatically, select Run… from
the Start menu.
3. Depending on your drive, enter, for example:
•
for Adobe Premiere 4.2LE
e:\english\win95&nt\disk1\setup.
•
for Adobe Premiere 5.1LE
e:\premiere\setup.
If your CD-ROM drive has a different drive designation, change the path
accordingly.
—or—
4. Click on Browse..., switch to your CD-ROM drive and to the directory
mentioned above and double-click the
setup.exe
file.
5. Click OK.
6. Follow the program installation instructions on the screen.
The complete Adobe Premiere documentation is available as PDF file on the
corresponding Adobe Premiere CD-ROM. You can view the documentation
using the Acrobat Reader. If the Acrobat Reader has not already been
installed on your computer, it will be installed together with your DV200
software.
After you have installed Adobe Premiere on your computer, you can install
the miroVIDEO DV200 board.
Adobe Premiere
documentation