Pinnacle Systems miroVIDEO DV200, User Manual

Page: 20 / 114

14
miroVIDEO DV 200
Windows 95 (OSR 2)
To install the drivers for the OSR2 Release, proceed as follows:
1. Switch on computer.
Switch on your computer. Windows 95 is started automatically. If your
computer is configured in such a way, that Windows 95 is not started
automatically, please start Windows 95 now.
After Windows 95 starts, the New hardware component found dialog box
appears followed by the Update Device Driver Wizard dialog. A PCI
FireWire (IEEE 1394) will be detected.
2. Click Next.
Click on the Next button.
3. Insert the CD-ROM.
Insert the installation CD-ROM into the CD-ROM drive.
4. Click Other Locations....
Click on the Other Locations... button.
5. Click Browse... .
Click on the Browse... button.
6. Switch into the
\DRIVER
directory, click OK.
Switch to your CD-ROM drive and go into the
\DRIVER
directory. Click
OK.
7. Click Finish.
Click on the Finish button.
8. Click OK and Browse... again.
When your system requests you to insert the CD-ROM again, click on OK
and once again on Browse... .
9. Switch into the
\DRIVER
directory, click OK.
Switch to your CD-ROM drive and go into the
\DRIVER
directory. Click
OK.
10.Click OK.
Click the OK button again.
Windows 95
(OSR 2)