Pinnacle Systems miroVIDEO DV200, User Manual

Page: 14 / 114

8
miroVIDEO DV 200
Select a file.
Click on the Print-to-tape button on the right-hand side of the Capture
Gallery. DVTools will prompt you to select the file you want to print to
tape. After selecting the file, the print-to-tape process will start
immediately.
C
APTURING SINGLE FRAMES
(Q
UICK
S
TART
)
Connect your DV equipment.
If you haven't already, connect your DV camcorder or DV video
recorder to the DV200 board.
Turn on your DV equipment.
Switch your DV device on. Select the desired mode (either VTR or
Camera mode).
Open the DV Device Controller.
To open the DV Device Controller, click on the (camera) icon in the
DVTools window.
Create bitmap.
Click on the
(snapshot) button.
Name and save the BMP file.
Enter a name and a location where you like to save your BMP file.
What's next?
For more detailed instructions concerning any of the above functions, please
refer to the following chapters. You can also find information concerning the
installation of a PCI expansion board in the documentation supplied with
your computer.