Operation
Operating Manual PMI 6 primo
1004647-EN-02
53
8.2.3
Reset commands
8.2.3.1
Warm reset
This command
}
Stops the user program.
}
Resets all variables to the value with which they were initialised (exception: variable
with attribute RETAIN).
}
Resets all variables that have not been explicitly initialised to a default initialisation
value.
Commands:
}
Command language: RS4
}
IEC 61131 programming: Menu
Online -> Reset
8.2.3.2
Cold reset
This command
}
Stops the user program.
}
Resets all variables to the value with which they were initialised.
Commands:
}
Command language: RS5
}
IEC 61131 programming: Menu
Online -> Reset (cold)
8.2.3.3
Original Reset
This command
}
Deletes the user program.
}
Resets all variables to the value with which they were initialised (including remanent
variables with attribute RETAIN and PERSISTENT).
}
Resets the motion control software to its original condition (factory default settings).
Commands:
}
Command language: RS6
}
IEC 61131 programming: Menu
Online -> Reset (original)
