Introduction
Operating Manual PMI 6 primo
1004647-EN-02
6
1
Introduction
1.1
Validity of documentation
This operating manual is valid for the following products
}
PMI 607 primo
}
PMI 612 primo
}
PMI 638 primo
It is valid until new documentation is published.
This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product.
Please also refer to the following documents from the motion control range:
}
The configuration and programming software for motion control devices (e.g.
CODESYS, PASmotion) can be found on the Internet at www.pilz.com.
}
The manuals for Pilz products from the PMC product area are available on the supplied
DVD "Drive technology PMC – Operating manuals".
You will need to be conversant with the information in these documents in order to fully un-
derstand this operating manual.
1.2
Using the documentation
This document is intended for instruction. Only install and commission the product if you
have read and understood this document. The document should be retained for future ref-
erence.
1.3
Definition of symbols
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.
