Commissioning
Operating Manual PMI 6 primo
1004647-EN-02
36
(12) Number of Chan-
nels:
12
(13) Change System-
time:
20-02-2015 18:52:20
(25) SafetyNET p RTFL
Cycle time:
1000 µs
( 9) CAN node address
50
( 3) CAN1 baudrate:
1000 KBit
( 8) CAN1 cycle time:
2 ms
(16) Startup delay:
0 s
(22) CAN-mode:
CAN1: Master
(26) PMCprotego with
SD-Card:
automatic
(35) Codesys:
Version 3
(36) No CAN reserved
for Codesys
(11) PROFIBUS Address: 25
( 5) PROFIBUS IN/OUT
Length:
20 (words)
( 6) PROFIBUS Offset:
0
(28) Modbus Client
not active
*********************************************************
0:
Exit menu
2:
Delete application data
3:
Change CAN1 baudrate
4:
Change Ethernet
5:
Change in/out length for Profibus
6:
Change offset for Profibus
8:
Set CAN1 Cycle time
9:
Set CAN address
11: Change Profibus address
12: Change number of channels
16
Change startup delay
22: Enable slave mode for CAN
24: Change cycle time of system
25: Set SafetyNET p RTFL Cycle time
26: Set address for PMCprotego with SD-Card
28: Set number of ModbusClient
29: Change ModbusClient Parameter
35: Set Codesys Version
36: Reserve CAN for Codesys
Choice [Return; ESC exits menu]:
