Photon Focus MV1-R1280-50-G2 Camera Series, User Manual

Page: 92 / 95

A Pinouts
Pin I/O Type Name Description
1 PWR CAMERA_GND Camera GND, 0V
2 PWR CAMERA_PWR Camera Power 12V..24V
3 O ISO_OUT0 Default Strobe out, internally Pulled up to ISO_PWR
with 4k7 Resistor
4 I ISO_INC0_N INC0 differential input (G2: RS-422, H2: HTL),
negative polarity
5 I ISO_INC0_P INC0 differential input (G2: RS-422, H2: HTL), positive
polarity
6 PWR ISO_PWR Power supply 5V..24V for output signals; Do NOT
connect to camera Power
7 I ISO_IN0 IN0 input signal
8 O ISO_OUT1 (MISC) Q1 output from PLC, no Pull up to ISO_PWR ; can be
used as additional output (by adding Pull up) or as
controllable switch (max. 100mA, no capacitive or
inductive load)
9 I ISO_IN1(Trigger IN) Default Trigger IN
10 I ISO_INC1_N INC1 differential input (G2: RS-422, H2: HTL),
negative polarity
11 I ISO_INC1_P INC1 differential input (G2: RS-422, H2: HTL), positive
polarity
12 PWR ISO_GND I/O GND, 0V
Table A.2: Power supply connector pin assignment
92