Photon Focus MV1-R1280-50-G2 Camera Series, User Manual

Page: 35 / 95

Figure 5.4: Trigger Inputs - Multiple GigE solution
5.2.3 Trigger and AcquisitionMode
The relationship between AcquisitionMode and TriggerMode is shown in Table 5.2. When
TriggerMode =Off, then the frame rate depends on the AcquisitionFrameRateEnable property (see
also under Free running in Section 5.2.2).
The
ContinuousRecording
and
ContinousReadout
modes can be used if more than
one camera is connected to the same network and need to shoot images si-
multaneously. If all cameras are set to Continuous mode, then all will send the
packets at same time resulting in network congestion. A better way would be to
set the cameras in
ContinuousRecording mode and save the images in the memory
of the IPEngine. The images can then be claimed with ContinousReadout from one
camera at a time avoid network collisions and congestion.
.
5.2 Trigger and Strobe 35