PG Drives Technology R-NET OMNI Technical Manual Download Page 54

Page: 54 / 174

PG D

RIVES

ECHNOLOGY

MNI

– S

TANDARD

- O

PERATION

SK78813/5

The Hazards icon will only be visible when an Intelligent Lighting/Seating Module
is connected within the system.

11.2.6 Lights Icon

Off

The Lights icon will be switched on when the lights have been activated.

The Lights icon will only be visible when an Intelligent Lighting/Seating Module is
connected within the system.

11.3

Main Screen Area

:: Drive Screen ::

11.3.1

Profile Name

This is a text string that displays the name of the currently selected Profile. The
name is programmable, Refer to R-net Technical Manual SK77981 for details.

11.3.2 Clock

This displays the current time in a Numeric format.

Summary of Contents for R-NET OMNI















































































































































































Search results

Summary of Contents for R-NET OMNI

Reviews:

Related manuals for R-NET OMNI

Brands by name

Popular brands

PG Drives Technology R-NET OMNI, Technical Manual

Search results

Summary of Contents for R-NET OMNI

Reviews:

Related manuals for R-NET OMNI

Brands by name

Popular brands