PG Drives Technology R-NET OMNI Technical Manual Download Page 88

Page: 88 / 174

PG D

RIVES

ECHNOLOGY

MNI

– S

TANDARD

- P

ROGRAMMING

SK78813/5

The programmable options are: Blank, each of the standard R-net Modes and
each of the Omni Modes – Exit, Speed Adjust, Sleep, Lights and Settings.

If set to Blank, then there will be no menu item displayed.

If set to Exit, then selecting that option will take you back to Drive Mode.

Below is an example of programming:

Position 1:

Seating

Position 6:

Exit

Position 2:

Drive

Position 7:

Blank

Position 3:

Speed Adjust

Position 4:

Drive

Position 16:

Blank

Position 5:

Settings

The User Menu would appear as follows:

Summary of Contents for R-NET OMNI















































































































































































Search results

Summary of Contents for R-NET OMNI

Reviews:

Related manuals for R-NET OMNI

Brands by name

Popular brands

PG Drives Technology R-NET OMNI, Technical Manual

Search results

Summary of Contents for R-NET OMNI

Reviews:

Related manuals for R-NET OMNI

Brands by name

Popular brands