PG Drives Technology R-NET OMNI, Technical Manual

Page: 35 / 174

PG D
RIVES
T
ECHNOLOGY
O
MNI
– S
TANDARD
- I
NSTALLATION
SK78813/5 35
Switch lies with the healthcare professional who is commissioning the
wheelchair.
PG Drives Technology accept no liability for losses
arising from the non-use of a User Switch.
9 Programming the Omni to Suit the User
Ensure the R-net Control System’s Drive, Acceleration
and Deceleration settings are at a comfortable and
safe level prior to attempting to program the Omni to
suit the user. Refer to the R-net Technical Manual
SK77981 or the On-Board Programming Manual
SK78571 for details of how to program the R-net
Control System.
Programming should only be conducted by healthcare
professionals with in-depth knowledge of PG Drives
Technology electronic control systems. Incorrect
programming could result in an unsafe set-up of a
wheelchair for a user. PG Drives Technology accept
no liability for losses of any kind if these conditions
are not met.
For more details of all the programmable parameters mentioned in this
section, refer to the Programming chapter.
9.1 User Switch
With the exception of scanner operation the User Switch provides the following
functionality.
A short operation while not driving will select the different wheelchair functions.
See section Accessing Wheelchair Functions for more details.
A short operation while driving or making a seating adjustment will stop all
movement, i.e. an emergency stop function.