PerkinElmer OPTIMA 8000, Customer Hardware And Service Manual, Page: 265 / 285

Error Messages
269
System Error (SYSERROR) Messages for RF Generator
In the following chart, the first column lists the error code. The second column lists
the error messages that appear in the generator diagnostics software. The third
column gives the meaning of the error messages. The fourth column gives
suggestions for corrective action.
In some cases, the error value is 0 and therefore meaningless. However, in cases
where the RF generator is operating out of range, the value of the parameter is
reported. For example, if the error code is "01", Vds out of voltage range, the value
is the actual Vds voltage.
The following messages are listed numerically by error code.
Note
For every error message reported, four pieces of information are given; the
error code, the error value, the time the error occurred and the error
message.
00 No Error There is no error. No corrective action is needed.
01 Vds out of
voltage
tolerance
window The drain to source
voltage across the
power FET transistor
is out of the
Tolerance window. Contact PerkinElmer Service.
02 Ids 1 out of
level 1
window The drain to source
current across the
power FET transistor
1 is out of the level 1
Tolerance window. Contact PerkinElmer Service.
03 Ids 2 out of
level 1
window The drain to source
current across the
power FET transistor
2 is out of the level 1
Tolerance window. Contact PerkinElmer Service.