PerkinElmer OPTIMA 8000, Customer Hardware And Service Manual, Page: 216 / 285

Maintenance
218
6. Insert the beveled end of the nebulizer capillary tubing into the other end of the
pump tubing.
7. Attach the capillary tubing to the sample inlet of the nebulizer.
Connecting the Drain Tubing Assembly
To connect the drain tubing assembly, use the following steps and refer to the next
figure.
1. Connect the sleeve (Part No. N0695415) and adapter (Part No. N0695414) to the
spray chamber drain. Thread the barbed fitting (Part No. 09920267) into the
coupler and adapter.
2. Attach the Solvent Flex (PVC) tubing (Part No. 09985735) to the barbed fitting.
Attach the other end of the Solvent Flex (PVC) tubing to the tubing coupler (Part
No. 09920186).
3 Pump Tubing 0.76 mm i.d. (different part numbers available)
4 Polyethylene tubing (including with the Nebulizer, 0.58 mm
i.d. Part No. 09908265)
5 To Sample Inlet
Table 5-8. Spray Chamber Drain Spare Parts
Part No. Drain Spare Part
09920186 Barb Fitting Coupler 3/32 Tubing
09920267 Barb Fitting Male 10-32 UNF
09985708 PTFE Tubing 0.031 x 0.016
09985735 Solvent Flex Tubing, 0.11 mm ID
N0695414 Drain Adapter
N0695415 Drain Coupling
Item Description