Perkin-Elmer RamanStation 400 Series, Getting Started Manual

Page: 57 / 98

Introduction to the RamanStation 400 Series . 57
Sample Accessories (for Motorized XYZ Stage)
To use your sample accessories to collect data, place them in the motorized XYZ stage in the
RamanStation 400 Series sample compartment (Figure 27).
Figure 27 RamanStation 400 sample compartment
The Versatile Sample Holder (L1320227) is supplied with your RamanStation 400 Series
(Figure 28). You can use this holder to collect data from microscope slides, cuvettes, sample
tubes and capillary tubes.
Figure 28 Versatile Sample Holder
NOTE: When the joystick is used to move the stage, care should be taken that excessive
movement does not bring the camera into forceful contact with the sample, as this
may cause damage to both. Particular care should be taken when using the Versatile
Sample Holder.
The Raman Polarization Accessory (L1320284) that can be fitted to the RamanStation 400
Series spectrometers enables you to collect polarized Raman data in the RamanStation 400
sample compartment.
Microscope
slide
Cuvette
Capillary tube
Sample tube
XYZ stage
Lens snout
Sample accessory
connector
Alignment camera