42
EASYTOUCH
®
PL4/PSL4 Control Systems User’s Guide
Settings Menu: Circuit Names
Labeling Circuit Buttons in the EasyTouch
®
PL4/PSL4 Control System Power Center
EasyTouch PL4/PSL4 Control System is factory configured to display each output circuit by its generic name
(e.g. AUX 1, AUX 2, AUX 3). These generic circuit auxiliary names can be assigned a new names which are
more descriptive of the equipment being controlled. This makes it much easier to operate all of the pool, spa
and lighting equipment without having to memorize what each output controls.
For circuit identification, adhesive backed circuit name labels are provided for placement next to each auxiliary
control panel button. Use the written list of circuit names (buttons) that you made while setting up the Power
Center. Identify what you labeled circuit button 1, button 2 etc. The circuit names you assign should match the
labels you put on the Power Center control panel buttons and/or the optional Indoor Control Panel buttons.
Note that examples shown below use the factory set generic output names displayed in the control system
control panel menus.
Circuit Names
To assign circuit names:
MENU
s
SETTINGS
s
CIRCUIT NAMES
w
CIRCUIT NAMES
Up/Down buttons:
Select the circuit number
1
/7. Press the
Up button
two times to
select AUX 1.
The generic circuits names are: Spa (1/7), Pool (2/7), Aux 1-3 (3-
5/7), Ft 1-2 (6-7/7).
The circuit number 1/7 corresponds to its assigned circuit name.
This name can be changed to suit the function.
Right button:
Move to system preset circuit names and user defined custom circuit
names.
Up/Down buttons:
Scroll through the list of alphabetical programmed names. If you
cannot find a name to match your circuit, you can create your own custom name
(see page 48). Repeat for all the circuit buttons that you wish to assign names to. For
a complete list of system circuit names, see page 43.
Press the
Menu
button to save the settings and to return to the Settings menu
options. Press the button again to return to the main menu options or press again to
return to the main screen.
Note: After a generic circuit name is changed and saved, the new name is displayed
in the menu settings. You can view the default generic circuit names in the menu
settings before they were changed by enabling “Cir Names.” Refer to “Diagnostics: Cir
Names (Off),” on page 59.
Hi-Temp/Lo-Temp Controls for Single Body System
For an EasyTouch PL4 Control System single body system, you have the option to control your pool and
spa temperature settings using the Valves (V) button or the Spa (Hi-Temp) and Pool (Lo-Temp) button on the
optional Indoor Control Panel. Change the circuit name
SPA
to
HI-TEMP
and
POOL
to
LO-TEMP
so that the
display shows the correct temperature controls for your single body system.
Circuit Names
Circuit #: 1/7
Circuit : SPA
[SPA JET ]
