26
EASYTOUCH
®
PL4/PSL4 Control Systems User’s Guide
Setting up lights
(Continued)
Modes (Color Set)
The “Color Set” feature allows any combination of up to three IntelliBrite
®
, S
Am
®
, S
AL
®
,
and/or FIBER
works
®
lighting to be preset to specific colors. Fixed light colors are selected and activated from the Colors screen.
IntelliBrite Light: If the light was not previously on, after selecting the fixed colored light, no illumination will
occur for approximately six (6) seconds followed by the selection. If the light was previously on, after selecting
the colored light, the previously selected color will momentarily illuminate, no illumination will occur for
approximately six (6) seconds followed by the selection.
Colors
Choose any one of the five fixed colors to create a spectacular underwater lighting effect. The fixed colors
are:
Blue, Green, Red
,
White
and
Magenta
. You can switch each fixed colored light on or off from the Colors
screen.
IntelliBrite Light: If the light was not previously on, after selecting a fixed colored light, no illumination will
occur for up to ten (10) seconds (depending on the selection), then a white light will momentarily illuminate,
followed by the color selection. If the light was previously on, selecting the a color button will momentarily
illuminate the previously selected color before changing to the selected color.
To select a fixed color press:
Menu > Lights > Modes > Colors
:
Up/Down
buttons:
Choose a color for the light.
Right
button:
Switch the selected colored light ON. To switch the light off, go to
the main Lights menu and select
All Off
, or press the AUX button assigned to the
light. The AUX button will also switch the light on.
Press the
Menu
button three times to return main menu.
Hold/Recall
Select Hold and Recall from the “Modes” or “Color” screen to capture and save a unique color effect and recall
it at a later time. For example, while a light show (Romance Mode) is active, select “Hold” to save the exact
colors that are being displayed, then later, to recall the exact color effect, select “Recall.”
Note: After selecting
Hold or Recall
, no illumination will occur for up to 10 seconds, then a white light will
momentarily illuminate, followed by the saved color.
All On / All Off (Lights Menu)
Select
All On
or
All Off
from the Lights screen to manually switch all lights on or off, including any
MagicStream laminar circuits. Press the control panel auxiliary button (AuxX) assigned to a light circuit will
also switch a light on or off.
Sync
Select
Sync
from the “Lights” screen to synchronize colors for all IntelliBrite, S
Am
, S
AL
and FIBER
works
color changing lights.
WARNING
- IntelliBrite Lights: During the off/on switching process,
before the selected color is displayed, no illumination will occur. This
operating mode is normal during the switching process. During this
period the pool and spa will be dark and precautions should be taken to
avoid unforeseen accidents. Failure to observe this warning may result in
serious injury or death to pool and spa users.
Blue
Green
Red
White
Green
Red
White
Magenta
Magenta
