Pentair EASYTOUCH PL4 User Manual Download Page 29

Page: 29 / 80

EASYTOUCH

PL4/PSL4 Control Systems User’s Guide

EasyTouch

PL4/PSL4 Control System Menus

(Continued)

MAIN SCREEN

LIGHTS

HEAT

POOL TEMP/SRC

TEMP (40° F - 104° F) OR (4° C - 41° C)

HEAT (OFF/HEATER/SOLAR/SOLAR PRF) - SOLAR/SOLAR PRF MUST BE ENABLED IN "SOLAR" MENU TO DISPLAY.

SPA TEMP/SRC

TEMP (40° F - 104° F) OR (4° C - 41° C)

HEAT (OFF/HEATER/SOLAR/SOLAR PRF) - "SOLAR/SOLAR PRF" MUST BE ENABLED IN "SOLAR" MENU TO DISPLAY.

DELAY CANCEL

MODE: SCHEDULE
08:00A -- 05:00P (12:00 AM - 11:59 PM -12 HOURS)
S M T W T F S (DAYS OF THE WEEK)

SCHEDULES

SPA

AUX 2 0

AUX 3 0

MODE: EGG TIMER
TIME: 12:00 (00:00 - 23:59) / DON'T STOP

SETTINGS

INTELLICHLOR

INTELLICHLOR 1/2 - ENABLE (YES/NO), POOL MODE: 0 - 100 % (50% default) SPA MODE: 0% (2% default)
INTELLICHLOR 2/2 - SUPER CHLR (ON/OFF), RUN HOURS (0 -72)

(OPTIONAL)

CIRCUIT NAMES

CIRCUIT NAMES (1/7) - [SPA, POOL, AUX1, AUX2, AUX3, FEATURE 1-2]

CIRCUIT FUNC.

CIRCUIT: (SPA [MASTER SPA], POOL [MASTER POOL], AUX 1-3, FEATURE 1-2, AUX EXTRA -

FREEZE: NO/YES

CUSTOM NAMES

CSTM NAME 1/7 (ASSIGN UP TO 100 CUSTOM NAMES)
[USERNAME-01...100] (UP TO 11 ALPHANUMERIC CHARACTERS)

2-SPEED PUMP

CIRCUIT (NONE, SPA, POOL, AUX1, AUX2,AUX3, FEATURE 1-2, SOLAR, HEATER, POOL HEATER, SPA HEATER, FREEZE)

2-SPEED PMP 1/4 (ASSIGN UP TO 4 CIRCUITS)

SOLAR

DELAYS

COOL DOWN (YES/NO) - VALVES (YES/NO)

SOLAR 1/2 - ENABLE (YES/NO) - HEAT PUMP (YES/NO) - SOLAR 2/3 - FREEZE,
SOLAR 3/3 (TEMPREATURE DIFFERENCE) - START (3

-9

(6° default)) - RUN (2

-5

(3° default))

VALVES

CLOCK

° /

iS4

FAHRENHEIT / CELCIUS

CIRCUIT - (NONE, SPA, POOL, AUX 1 - 3, FEATURE 1-2)

ASSIGN CIRCUITS 1/4

DATE & TIME 1/2 - (MONTH/DAY/YEAR) - (DAY/HOUR/MINUTES/AM/PM)

DATE & TIMER 2/2 - DAYLIGHT SAVING: (AUTO/MANUAL)

CLOCK ADJUST 00:00 (0 TO 300) - (-300 TO -5) IN 5 SCEOND INCREMENTS

(DELAYED CANCELLED) PRESS RIGHT BUTTON TO ACTIVATE

A: [NONE, SPA, POOL, AUX1, AUX2, AUX3, FEATURE 1-2, HEATER]
B: [NONE, SPA, POOL, AUX 1, AUX2, AUX3, FEATURE 1-2, HEATER]

POOL

AUX 1 0

MSTR CLEANER, LIGHT, SAM LIGHT, SAL LIGHT, PHOTON GENERATOR, COLOR WHEEL,

MODE: NEW / DELETE / NONE

HI-TEMP (SPA) / LO-TEMP (POOL) FOR SINGLE BODY SYSTEM (SEE SETTINGS MENU: CIRCUIT NAMES)

DIAGNOSTICS

SOFTWARE REV (REVISION LEVEL FOR THE OUTDOOR AND INDOOR CONTROL PANEL)

BOOTLOADER REV (REVISION LEVEL FOR THE OUTDOOR AND INDOOR CONTROL PANEL)
SELF TEST (STATUS: TESTING (FOLLOW ON-SCREEN PROMPTS TO TEST LCD AND BUTTONS) - CODE: 0 -

WATER TEMP (FAHRENHEIT/CELCIUS - STATUS DISPLAY ONLY)
SOLAR TEMP (FAHRENHEIT/CELCIUS - STATUS DISPLAY ONLY) - (DISPLAYS IF SOLAR IS ENABLED IN HEAT MENU)
AIR TEMP (FAHRENHEIT/CELCIUS - STATUS DISPLAY ONLY)

DISP OP CODES - DISPLAY? NO/YES (DISPLAYS TRANSMIT/RECEIVE PACKETS NUMBERS ON SCREEN)

SPA SIDE [OFF/ON]

ENABLE/DISABLE IS4 SPA-SIDE REMOTE

CIR NAMES [ON/OFF] VIEW DEFAULT CIRCUIT NAMES BEFORE MODIFICATION.

CHLORINATOR

SALT LEVEL: DISPLAYS CURRENT SALT LEVEL (XXXX) PPM

STATUS: OK - NO ERRORS (SUPER CHLORINATE, COM LINK ERROR, CHECK FLOW / PCB,

RESET SYSTEM (REINITIALIZE INDOOR CONTROL PANEL - USE RIGHT BUTTON)
FLASH UPDATE (USED FOR FIRMWARE UPDATES VIA PC - PRESS MENU TO ABORT)

INTELLIFLO

(OPTIONAL)

FEATURE 1-2 0

MODES [6 LIGHT SHOWS, HOLD, RECALL, COLOR SWIM, COLOR SET]
COLORS [5 FIXED COLORS, HOLD, RECALL, COLOR SWIM, COLOR SET]
ALL ON

(SWITCH ALL LIGHTS ON)

ALL OFF

(SWITCH ALL LIGHTS OFF)

SYNC

(SYNCHRONIZE COLORED LIGHTS)

MAGICSTREAM [TOGGLE THUMPER, HOLD, RESET, CHANGE MODE]
CONFIG (SETUP EIGHT LIGHT POSITIONS)

FEATURE CIR

FEATURE 1-2 [OFF]

FEATURE 1 - 2

MANUALLY TURN A FEATURE CIRCUIT ON/OFF.
USE FEATURE CIRCUITS TO CONTROL PUMP SPEEDS AND VALVES.

PUMP #1 - PUMP TYPE [VS, VSF, NONE]

HEAT PUMP COM

SETTINGS: ENABLE, DISABLE (NO/YES) - [HEATING, COOLING] - STATUS

(OPTIONAL)

QUICK TOUCH II

ASSIGN QT4 II 1/4 (ASSIGN UP TO 4 CIRCUITS)
CIRCUIT - (NONE, SPA, POOL, AUX 1 - 3, FEATURE 1-2)

ERASE EEPROM

ERASE ALL (YES /NO) - ARE YOU SURE? (YES/NO)

CALIBRATION

WATER (FAHRENHEIT/CELCIUS) - AIR (FAHRENHEIT/CELCIUS) - SOLAR (FAHRENHEIT/CELCIUS) -

SWITCH MANUAL HEAT ON OR OFF WHEN SPA IS MANUALLY SWITCHED ON (USE RIGHT BUTTON SELECT ON/OFF)

MAN HEAT [OFF/ON]

SET PASSWORD

SET PASSWORD: {XXXX} 4 DIGITS - ENABLE / DISABLE [NO/YES]

WIRELESS ADDR

SET AN ADDRESS FOR EASYTOUCH WIRELESS CONTROL PANEL

INTELLICHEM

PH/OPR Values (pH VAL, SET - OPR VAL, SET) - Status (pH/OPR level) - Saturation Index (CH,TDS,TA,SI)

(OPTIONAL)

WIRELESS ADDR

SET AN ADDRESS FOR EASYTOUCH WIRELESS CONTROL PANEL

BACKLIGHT

ON TIME: 5 S, 15 S, 30 S, 60 S, 5 M, OFF [BRIGHTNESS: LOW, MED HI]

POWER SAVE

IDLE TIME: 15 S, 30 S, 60 S, 5 ME

FILTERING, PRIMING, BACKWASH, VACUUM, STATUS

FUNCTIONS: GENERIC, MASTER SPA, MASTER POOL,

SPILLWAY, FLOOR CLEANER, INTELLIBRITE, MAGICSTREAM,

SOLAR MUST BE ENABLED IN "HEAT" MENU TO DISPLAY

SEE "TROUBLESHOOTING" SECTION FOR ERROR CODES)

LOW SALT, VERY LOW SALT, HIGH CURRENT, CLEAN CELL!!, LOW VOLTAGE)

WIRELESS CONTROL PANEL ONLY

Summary of Contents for EASYTOUCH PL4

















































































Search results

Summary of Contents for EASYTOUCH PL4

Reviews:

Brands by name

Popular brands

Pentair EASYTOUCH PL4, User Manual

Search results

Summary of Contents for EASYTOUCH PL4

Reviews:

Brands by name

Popular brands