Mounting the SmartNode 2400
102
SmartNode 1000 and 2000 Series Getting Started Guide
7 • SmartNode 2400 installation
Do the following to mount a SmartNode 2400 in a 19-inch rack:
1. Locate the two angled mounting brackets included in the installation kit pack. The bracket (see
figure 68
)
is designed so you can have the 1.5 cm flange facing to the front or to the rear. There are four holes for
countersunk screws on the long side of the bracket.
Figure 68. SmartNode 2400 rack mounting bracket location holes
2. Attach a bracket to each side of the SmartNode 2400 with the four self-tapping screws provided. There are
three mounting positions for the brackets (positions A, B, and C as shown in
figure 68
on page 102), so
choose the one that best suits your requirements.
3. Install the unit into the rack using the user-provided rack mounting hardware.
de 2400
ated Access Device
SmartNode 2400
ToIP Integrated Access Device
Position A
mounting holes
Position B
mounting holes
Position C
mounting holes
Mounting bracket
(2 places)
Self-tapping screws
