SmartNode 2300 description
29
SmartNode 1000 and 2000 Series Getting Started Guide
1 • General Information
In addition, two other elements— the Reset button and power input socket—are available on the rear panel of
a SmartNode 1200 as described in
table 7
.
Do not plug in an ISDN connection. The voltage on the S-Bus
may permanently damage the console interface.
Table 7. SmartNode 2300 Reset button and power line socket on rear panel
Element
Description
Reset button
The button has three different functions:
•
Manual Restart—
During normal operation pressing and releasing the reset button
will cause a system reboot. The application will be restarted without any change to the
existing SmartWare configuration
.
•
Restoration—
Pressing and holding the reset button for 5 seconds will restore the fac-
tory configuration and automatically reboot the system.
Note
In this case the existing IP SmartWare configuration is lost.
•
Boot loader—
Powering the SmartNode while pressing the reset button for 5 seconds
will cause the factory-fitted boot loader to start in place of the application. The boot
loader uses a minimal set of parameters. In case the application does not start correctly,
the boot loader can be used as a fallback to download a new software version.
100–240 VAC
50–60 Hz
Electricity supply socket for mains power cable.
CAUTION
