Parker 590 series, Product Manual

Page: 100 / 242

6-10
Programming Your Application
590 Series DC Digital Converter
AUX PORT P2
This function block configures the port for
connecting to a suitable unit, i.e. the 5721
Operator Station for controlling the 5720
Quadraloc controller.
MMI Menu Map
1 SERIAL LINKS
2 AUX PORT P2
SRL LINK ENABLE
GROUP ID (GID)
UNIT ID (UID)
PROTOCOL
BAUD RATE
ESP SUP. (ASCII)
CHANGEBAND (BIN)
ERROR REPORT
PNO.7
AUX PORT P2
ENABLED – [147] SRL LINK ENABLE –
0 – [140] GROUP ID (GID) –
0 – [141] UNIT ID (UID) –
ASCII
–
[149] PROTOCOL
–
9600 – [151] BAUD RATE –
DISABLED – [153] ESP SUP. (ASCII) –
0.00%
–
[145] CHANGEBAND (BIN)
–
00C0 – [150] ERROR REPORT –
FFFF – [148] PNO. 7 –
Parameter Descriptions
SRL LINK ENABLE Range: ENABLED/DISABLED
Enables port operation.
GROUP ID (GID) Range: 0 to 7
The Parker SSD Drives protocol group identity address.
UNIT ID (UID) Range: 0 to 15
The Parker SSD Drives protocol unit identity address.
PROTOCOL Range: See below
Selects the protocol to be used. The selections are:
ASCII
BINARY
OPTION (select OPTION if say a Profibus option is fitted)
BAUD RATE Range: See below
Selects the Baud Rate.
300
600
1200
2400
4800
9600 (default)
19200
ESP SUP. (ASCII) Range: ENABLED/DISABLED
Enable if communicating with a unit using Parker SSD Drive’s own ESP protocol.
CHANGEBAND (BIN) Range: 0.00% to 327.67%
Percentage change in value to trigger a BINARY Enquiry Poll update.
ERROR REPORT Range: 0000 to FFFF
Displays the last error as a hexadecimal code. Writing any value to this parameter will set the
value to >00C0 (No Error). Refer to Chapter 14: “Serial Communications” - Reference for a list
of codes.
PNO. 7 Range: 0000 to FFFF
Control word for Multi-Parameter Polling (refer to the COMMS Option Board Technical
Manual - Parameter Specification Tables.