4
LED control panel
No. Name
Functions
1
Consumable status
indicator
Indicate the status of consumables
2
Paper status indicator
Indicate the status of paper
3
Printer status indicator
Indicate the status of printer
4
“Cancel/Continue” button
If the printer is in sleep state, press or long press this button to wake
it up.
Press and hold this button during printing to cancel the current print
job.
When the printer is in ready state, long press this button to print the
information page.
5
“Power” button
• Turn on or o
ff
the printer.
Note:
Press and hold this button for more than 2 seconds to turn off
the printer.
• When the printer is in ready state, short press this button, and the
printer enters the sleep state.
• When the printer is in sleep state, short press this button to wake up
the printer.
Summary of Contents for PT14C1A Series
