27
08
Routine Maintenance
Note:
•
Printer appearance may differ because of different models and functions, so the schematic
diagram is only for your reference.
leaning the Printer
:Some parts of the printer are still in high temperature within a short time after use. To prevent
burns, please don’t directly touch places labeled with high temperature warning in contact with
internal components after opening the printer’s front or rear.
Note:
•
Disconnect the printer before cleaning.
•
Please use mild detergents.
• Use caution when using the printer display to prevent pressing or damaging the touch display.
Please use a soft dry cloth or dip in a neutral detergent or ethanol to clean the display surface. Do
not use any organic solvents, acidic or alkaline solutions.
Summary of Contents for PT14C1A Series
