23
Red Auto Enhancement function
When the red content on the printed portrait does not meet the expectation, you can try to adjust
the color of the portrait via the "Red Auto Enhancement" function. The operation steps are as
follows:
The Windows 7 system is taken as an example in the following steps. The information indicated on
your computer screen may vary from operating system to operating system.
1. Open the file you want to print. Click the "File" menu in the upper left corner. Select "Print" to
bring up the print driver.
2. Select the corresponding printer model.
3. Click "Printer Properties/Preferences" to configure the printing.
4. Enter the "Quality" option interface. Check "Red Auto Enhancement" and click "Settings".
Summary of Contents for PT14C1A Series
