50
Paper Jam
• Too many papers in paper tray.
• The print media is out of the
supported media range.
• There is foreign matter in the paper
path.
• The feed roller is dirty.
• Internal parts failure.
• Remove excess paper from the tray. For
printing on special print media, use the
manual tray.
• Make sure to use the paper that meets
specifications. For printing on special print
media, use the manual tray.
• Clean the paper path.
• Clean the feed roller.
Print
multipage feed
• Excessive static electricity on the
print media.
• The print media is damp and is
sticking together.
• Internal parts failure.
• Separate the print media to eliminate some
static electricity. It is suggested that you use
the recommended print media.
• Separate the print media or use better
quality and dry print media.
Note:
• If the problem persists, please contact the customer service center. See the Guarantees
certificate
for contact details.
Summary of Contents for PT14C1A Series
