•
Alarm permission(Terminal alarm 3):
Terminal 3 alarm input will be allowed during the period of the
schedule.
•
VMD permission:
The video motion detection (VMD) function will be active during the period of the
schedule.
•
Audio detection permission:
The audio detection function will be active during the period of the
schedule.
•
Access permission:
Users whose access level is set to “2. Camera control” and “3. Live only” on the
[User auth.] tab (
page 174) can access the camera only in the period of schedule.
•
Recording to SD(Recording stream1):
The SD recording will be performed at the designated time
in the schedule. Further, the “Recording format” is enabled only when there is a stream.
•
Recording to SD(Recording stream2):
The SD recording will be performed at the designated time
in the schedule. Further, the “Recording format” is enabled only when there is a stream.
•
Position refresh:
The camera position will be refreshed at the designated time in the schedule.
•
1-256:
The camera will move to the selected position from the preset position at the designated time
in the schedule.
•
Image adjust 1:
Scene 1:
Images are set to the image settings of “Scene file 1” at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of “Scene file is not applied”.
•
Image adjust 1:
Scene 2:
Images are set to the image settings of “Scene file 2” at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of “Scene file is not applied”.
•
Image adjust 1:
Scene 3:
Images are set to the image quality settings of “Scene file 3” at the
designated time in the schedule. Once designated time in the schedule is over, the image quality setting
is set to “Scene file is not applied”.
•
Image adjust 1:
Scene 4:
Images are set to the image quality settings of “Scene file 4” at the
designated time in the schedule. Once designated time in the schedule is over, the image quality setting
is set to “Scene file is not applied”.
•
FTP periodic image transmission:
FTP periodic image transmission will be performed at the
designated time in the schedule.
•
E-mail permission:
While the schedule is set, e-mail notification is sent when alarm is input.
Note
•
Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (
®
page 174) and “Off” for
“Host auth.” on the “Host auth.” page (
page 177) to validate “Access permission”.
•
When selecting “Recording to SD(Recording stream1)” or “Recording to SD(Recording stream2)”,
select “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” for “Recording format” on the [SD
memory card] tab and select “Schedule” for “Save trigger”. (
®
2.
Select days of a week by checking the respective checkboxes.
3.
From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of “24h”.
4.
Click the [Set] button after completing the settings.
→
The result will be displayed at the bottom of the window.
Note
•
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
•
If the schedules for position refresh and image quality are set to the same times, the action for image
quality will be performed after the action for position refresh is finished.
Operating Instructions
229
2 Settings