manualshive.com logo in svg

Panasonic WV-X6511N, Operating Instructions Manual

Share
Download
Panasonic WV-X6511N Operating Instructions Manual Download Page 98

2.5.3  Configure the settings relating to Stream [Image]

Click the [Image] tab on the “Image/Audio” page. (

®

For menu display and how to operate, refer to page 47,

page 48)
Configure the settings relating to H.265 (or H.264) image such as “Max bit rate (per client)”, “Image capture
size”, “Image quality”, etc. in this section. Refer to page 96 for the settings relating to JPEG images.

Stream(1)/Stream(2)/Stream(3)/Stream(4)

[Stream transmission]

Select “On” or “Off” to determine whether or not to transmit H.265 (or H.264) images.

•

On:

 Transmits H.265 (or H.264) images.

•

Off:

 Does not transmit H.265 (or H.264) images.

•

Default:

 On

Note

•

When “On” is selected for “Stream transmission” in “Stream(1)”, “Stream(2)”, “Stream(3)”, or
“Stream(4)” displaying of H.265 (or H.264) images or JPEG images on the “Live” page will become
available.

•

When “On” is selected for “Stream transmission” for “Stream(1)”, “Stream(2)”, “Stream(3)”, or
“Stream(4)”, the refresh interval of JPEG images is limited to a maximum of 5 fps.

[Stream encoding format]

Select the stream encoding format for transmission.

•

H.265:

 Transmits H.265 images.

•

H.264:

 Transmits H.264 images.

•

Default:

 H.265

98

Operating Instructions

2 Settings

Summary of Contents for WV-X6511N










































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands