5.
Click the [Confirm] button.
→
The image (“Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)”) that the [Confirm] button was
pressed for is displayed. When a window is newly opened and about 3 seconds pass, the currently
outputted bit rate can be confirmed with the configured VIQS.
IMPORTANT
•
No setting contents are determined unless the [Set] button is clicked.
•
To check the image after configuring VIQS, display an H.264 or H.265 image on the “Live” page, or
press the [Confirm] button under “Stream”.
•
The outputted bit rate changes depending on the subject. Confirm the bit rates with actual subjects
used when operating the camera.
•
When using “Smart Facial Coding”, “VIQS Area” cannot be enabled.
142
Operating Instructions
2 Settings
