![background image](http://html.mh-extra.com/html/panasonic/wv-x6511n/wv-x6511n_operating-instructions-manual_1511972075.webp)
•
If the settings for “Stabilizer” are changed when the following area settings are configured, the positions
of the configured areas may move out of alignment. Configure each area after configuring
“Stabilizer” settings.
–
mask area
–
privacy zone
–
VMD area
–
VIQS area
•
If “On” is selected for “Stabilizer”, the privacy zone may move out of alignment when the stabilizer is
operating. If you will use privacy zone, we recommend not using “Stabilizer”.
Note
•
If there is shaking in dark environments, image stabilization can become more effective by using a
high-speed shutter setting of “Max. 1/100s” or more for “Maximum shutter”. Configure “Maximum
shutter” according to the installation environment.
•
When the camera is used in environments of 40°C or higher, the effectiveness of the stabilizer will be
reduced.
[Indicator]
Determine whether or not to use the following status indicators.
•
On:
All the indicators will light in accordance with the status.
•
On(Access):
Only the live indicator will light when images are viewed.
•
Off:
All the indicators are turned off.
•
Default:
On
Note
•
STATUS indicator (red/orange/green):
The live indicator will light or blink as follows depending on
the camera status.
Operation status
Indicator status
When the power is turned on
Before the network
connection is established
Lights orange
®
Lights off
®
Blinks
orange
®
Lights orange
When the network
connection is established
Lights orange
®
Lights off
®
Blinks
orange
®
Blinks green
®
Lights
green
During standby or connection (Cable is not connected.)
Lights orange
During standby or connection (Cable is connected.)
Lights green
During the upgrade process
Blinks orange
During the initialization (When the network connection is
established)
Lights orange
®
Lights off
®
Blinks
orange
®
Lights orange
®
Blinks
orange
®
Blinks green
®
Lights
green
Port forwarding error caused by the UPnP function
Blinks orange (in 2 seconds
intervals (on for 1 second / off for 1
second))
Trouble happening on the camera
Blinks red
Failure in writing data on the SD memory card
Lights red
Operating Instructions
75
2 Settings