manualshive.com logo in svg

Panasonic WV-X6511N, Operating Instructions Manual

Share
Download
Panasonic WV-X6511N Operating Instructions Manual Download Page 82

JPEG recording(Manual)

This setting is only available when “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Recording format”, and
“Manual” is selected for “Save trigger”.

[File name]

Enter the file name used for the image to be saved on the SD memory card. The file name will be as follows.

•

File name:

 [“Entered file name” + “Time and date (year/ month/ day/ hour/ minute/ second)”] + “Serial

number”

•

Available number of characters:

 1 - 8 characters

•

Unavailable characters:

 " & * / : ; < > ? \ |

[Image saving interval]

When “Manual” is selected for “Save trigger”, select an interval (frame rate) of saving images on the SD memory
card from the following.
0.1fps/0.2fps/0.33fps/0.5fps/1fps

•

Default:

 1fps

JPEG recording(Alarm)

This setting is only available when “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Recording format”, and
“Alarm input” is selected for “Save trigger”.

[File name]

Enter the file name used for the image to be saved on the SD memory card. The file name will be as follows.

•

File name:

 [“Entered file name” + “Time and date (year/ month/ day/ hour/ minute/ second)”] + “Serial

number”

•

Available number of characters:

 1 - 8 characters

•

Unavailable characters:

 " & * / : ; < > ? \ |

[Image saving interval/Number of images to be saved(Pre alarm)] - [Image saving interval]

When “Alarm input” is selected for “Save trigger”, select a pre alarm interval (frame rate) of saving images on
the SD memory card from the following.
0.1fps/0.2fps/0.33fps/0.5fps/1fps

•

Default:

 1fps

[Image saving interval/Number of images to be saved(Pre alarm)] - [Number of images to be
saved]

Select a number of pre alarm images to be saved on the SD memory card from the following.
Off/1pic/2pics/3pics/4pics/5pics

82

Operating Instructions

2 Settings

Summary of Contents for WV-X6511N










































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands