•
When “Direction display” is selected, configure the direction of north in “North point setting” of
“Direction/Angle setting”. (
®
[Operation mode display]
When the camera is operating automatically, the operation mode is displayed.
•
On:
Displays the operation mode.
•
Off:
Does not display the operation mode.
•
Default:
Off
Operation mode
Display
The camera is initializing.
INITIAL
The camera is auto panning.
AUTO PAN
The camera is waiting to start
auto tracking.
AUTO TRACK WAITING
The camera is auto tracking.
AUTO TRACKING
The camera is patrolling.
PATROL
The camera is moving through
the preset sequences.
PRESET SEQ
[Tilt Angle]
Select the maximum degree for tilting from the following. (Level = 0°)
10°/ 5°/ 3°/ 0°/ –3°/ –5°/ –10°/ –15°
Default:
0°
Note
•
If “0°”, “–3°”, “–5°”, “–10°”, or “–15°” is selected, when the camera reaches horizontal or further, the
area of the image blocked by the camera housing increases. The blocked area can be approximately
halved by selecting “–15°” for “Tilt Angle”.
[Focus Distance]
When shooting a subject through glass or when an object other than the subject is close to the camera when
shooting, it may be difficult to focus on the subject. In this case, the minimum focus distance can be limited.
•
Unlimited:
Does not limit the minimum focus distance.
•
Limited:
The minimum focus distance is limited so that objects within about 3 m of the camera are not
focused on.
•
Default:
Unlimited
[Double image reduction]
When shooting subjects horizontally, the light coming into the lens can be limited in order to make images
clearer.
•
On:
Limits the light coming into the lens.
•
Off:
Does not limit the light coming into the lens.
•
Default:
On
106
Operating Instructions
2 Settings
