![background image](http://html.mh-extra.com/html/panasonic/wv-x6511n/wv-x6511n_operating-instructions-manual_1511972081.webp)
•
When using the SD memory recording function of a Panasonic network disk recorder, select
“JPEG(1)” for “Recording format” of “Recording stream 1”.
•
When “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for “Recording format”, the
settings of the following functions may be corrected.
–
When “VBR” is selected for “Transmission priority”, “Frame rate” is set.
–
When “2s”, “3s”, “4s” or “5s” is selected for “Refresh interval”, “1s” is set.
•
When “On” is selected for “Additional info for detecting alteration”, “Recording format” cannot be
changed to “JPEG(1)”, “JPEG(2)”, or “JPEG(3)”.
•
When “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for “Recording format”, the
name of the saved file will be given automatically.
•
When “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for “Recording format”, the
number of users that can access the camera may be reduced.
•
If “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for the “Recording format” of “Recording stream 1”,
and “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for the “Recording format” of
“Recording stream 2”, the maximum bit rate that can be selected for “Stream” is limited.
•
When “On” is selected for “Audio recording”, the maximum value of the available bit rate for “Stream”
will be limited.
•
When “On” is selected for “Additional info for detecting alteration”, the maximum value of the available
bit rate for “Stream” will be limited.
[Save trigger]
Select a trigger to save images on the SD memory card from the following.
•
FTP periodic image transmission error:
Saves images when images have failed to transmit to the FTP
server by the FTP periodic image transmission function. Available only for the “JPEG(1)”, “JPEG(2)”, or
“JPEG(3)” images.
•
Alarm input:
Saves images at an alarm occurrence.
•
Manual:
Saves images manually.
•
Schedule:
Saves images in accordance with the settings for “Schedule” (
®
the “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” images.
•
Default:
–
Recording stream 1:
FTP periodic image transmission error
–
Recording stream 2:
Alarm input
If you have selected “Alarm input” in the [Save trigger], you can select the alarm type from the following:
•
Terminal 1:
Save the image when an alarm occurs in Terminal 1.
•
Terminal 2:
Save the image when an alarm occurs in Terminal 2.
•
Terminal 3:
Save the image when an alarm occurs in Terminal 3.
•
VMD:
Save the image when a motion detection occurs.
•
Command alarm:
Save the image when a command alarm is entered.
•
Audio detection:
Save the image when an audio detection occurs.
•
Auto track:
Save the image when an auto track alarm occurs.
Note
•
When “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for “Recording format”, “FTP
periodic image transmission error” is unavailable.
•
To enable alarms to occur, alarm settings must be configured in advance on the [Alarm] tab.
•
When “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Recording format”, “Schedule” is
unavailable.
Operating Instructions
81
2 Settings