Note
•
When a faster shutter speed is selected (up to 1/10000 Fix), it is possible to capture a fast moving
object with less blur.
•
When a faster shutter speed is selected, the sensitivity will become lower.
•
When “On” is selected for “Super Dynamic(SD)”, “Fix shutter” is not available.
To configure “Fix shutter”, set “Super Dynamic(SD)” to “Off”.
•
When “Fix shutter” is used, if there is fine weather (about 60,000 lx or more), subjects may be
overexposed.
When there is overexposure, increasing the shutter speed (up to 1/10000 Fix) can reduce it.
[AGC]
Select a method of gain adjustment from the following.
•
On(High)/ On(Mid)/ On(Low):
When the luminance of the subject becomes darker, gain will be
automatically increased and screen will become brighter. “High”, “Mid” and “Low” are indications of gain
level.
•
Off:
Images will be captured with the fixed gain level.
•
Default:
On(High)
[Maximum shutter]
The maximum shutter time adjusts the storage time of the sensor. The following are available for the recording
duration.
Max.1/1000s, Max.1/500s, Max.1/250s, Max.1/120s, Max.2/120s, Max.1/100s, Max.2/100s, Max.1/60s, Max.
1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s
•
Default:
Max.1/30s
IMPORTANT
•
When a value with an interval longer than “Max.1/30s” (Max.2/30s/ Max.4/30s/ Max.6/30s/ Max.
10/30s/ Max.16/30s) is selected for “Maximum shutter”, the frame rate may become lower. Noise or
white dots (blemishes) may sometimes appear.
Note
•
“Max.1/60s” can only be selected when “2 mega pixel [16:9](60fps mode)” is selected for “Image
capture mode”.
•
When “Max.16/30s” is selected, for example, sensitivity will automatically be increased up to x16.
•
When “Off” is selected for “AGC”, values with an interval longer than “Max. 1/30s” (Max.2/30s/ Max.
4/30s/ Max.6/30s/ Max.10/30s/ Max.16/30s) will become unavailable.
When “2 mega pixel [16:9](60fps mode)” is selected for “Image capture mode”, “Max. 1/30s” will also
become unavailable.
•
The available values change depending on the light control mode settings.
[Day & Night(IR)]
Select switching between the color mode and the black & white mode from the following.
•
Off:
The color mode is selected.
•
On:
The black & white mode is selected.
•
Auto1(Normal):
The camera automatically switches between the color mode and the black & white mode
in accordance with picture brightness (luminance). The black & white mode will automatically be selected
when the lighting condition becomes darker, while the color mode will automatically be selected when it
becomes brighter.
•
Auto2(IR Light):
Suitable when using near-infrared light source at night.
•
Auto3(Super Chrome Compensation(SCC)):
Suitable to keep the color mode even under darker light
condition. The color mode will be carried on by the Super Chrome Compensation (SCC) function even
under illumination that is lower than Auto1(Normal).
•
Default:
Auto1(Normal)
Operating Instructions
63
8 Configure the settings relating to images and audio [Image/Audio]
