[Super Dynamic(SD)]
Select “On”, or “Off” to determine whether or not to activate the super dynamic function.
The super dynamic function cannot be selected when “2 mega pixel [16:9](60fps mode)” is selected for “Image
capture mode”.
Refer to the description “Super Dynamic function” (
page 61) about the super dynamic function.
•
On:
The super dynamic function will work.
•
Off:
The super dynamic function will not work.
•
Default:
Off
Note
•
When the following are observed depending on the light condition, select “Off” for “Super
Dynamic(SD)”.
–
When flickering appears or the color changes on the screen
–
When noise appears in the brighter area on the screen
Super Dynamic function
When there is wide variation between the illumination of light and dark areas of the location being monitored,
the camera adjusts the lens iris in accordance with the brighter areas. This causes loss of detail in darker areas.
Conversely, adjusting the lens brightness for the darker areas causes the brighter areas to become washed
out.
For images that have a large amount of contrast, Super Dynamic digitally combines an image that is set up
for a clear view of the brighter areas with an image that is set up for a clear view of the darker areas, creating
a final image that preserves overall detail.
A
B
C
A.
Subject in the dark
area is hard to notice...
B.
Subject in the bright
area is washed out...
C.
Creates a clearer
image by digitally
combining images
[Face SD]
With the “Face SD” setting, if a person's face is dark and difficult to see, by combining the face detection and
Super Dynamic functions, the area with the face in the image can be corrected to become brighter and easier
to see.
Operating Instructions
61
8 Configure the settings relating to images and audio [Image/Audio]
