•
When “Direction display” is selected, the direction display is displayed in the position specified in
“OSD” on the [Basic] tab. (
•
When “Direction display” is selected, configure the direction of north in “North point setting” of
“Direction/Angle setting”. (
®
[Operation mode display]
When the camera is operating automatically, the operation mode is displayed.
•
On:
Displays the operation mode.
•
Off:
Does not display the operation mode.
•
Default:
Off
Operation mode
Display
The camera is initializing.
INITIAL
The camera is auto panning.
AUTO PAN
The camera is waiting to start
auto tracking.
AUTO TRACK WAITING
The camera is auto tracking.
AUTO TRACKING
The camera is patrolling.
PATROL
The camera is moving through
the preset sequences.
PRESET SEQ
[Tilt flip]
Select the tilt flip setting from the following.
•
On:
When the camera attains its tilt end point with manual operations, the high-speed pan automatically
rotates the camera so that it does not stop at its tilt end point and enables operations to be continued.
•
Off:
Tilt flip does not operate.
•
Default:
On
Note
•
When the tilt flip is operated on the "Tele" side, there may be some areas that are not visible.
•
Click a desired point in the main area on the “Live” page that is to be the center of the angle of view.
The camera moves to adjust the position in order to set the clicked point as the center. Also in this
case, the camera does not stop at its tilt end point and operations can be continued.
Operating Instructions
57
8 Configure the settings relating to images and audio [Image/Audio]
